|
Posted by Anonymous on 03-30-2001 7:28 PM
|
*** Posted by Brad Carter ***
I am looking to start a 3d computer genertaed model of the f-16, If possible do you know where I can get some measurements.
The most important ones are:
length
wingspan
height
other usefull ones would be ones to help get the geometry right:
circumfance of the nose
measurements at tip and base of wings
Any others would help to get a realistic model.
Also any close pictures at as many angles as possible.
Hope this isnt to much to ask =)
thank you
|
|
|
|
Posted by Anonymous on 03-30-2001 8:20 PM
|
*** Posted by run ***
Hi
Here you can find some numbers:
<a href='http://www.af.mil/news/factsheets/F_16_Fighting_Falcon.html' target='_blank'>http://www.af.mil/news/factsheets/F_16_Fighting_Falcon.html</a>
And here is a link to a 3D VRML F16 model:
<a href='http://www.fighter-planes.com/VRML/f16.wrl' target='_blank'>http://www.fighter-planes.com/VRML/f16.wrl</a>
Regards John Raahauge (RUN)
[I am lookihttp://www.af.mil/news/factsheets/F_16_Fighting_Falcon.htmlng to start a 3d computer genertaed model of the f-16, If possible do you know where I can get some measurements.
The most important ones are:
length
wingspan
height
other usefull ones would be ones to help get the geometry right:
circumfance of the nose
measurements at tip and base of wings
Any others would help to get a realistic model.
Also any close pictures at as many angles as possible.
Hope this isnt to much to ask =)
thank you]
|
|
|
|
Posted by Anonymous on 03-30-2001 10:27 PM
|
*** Posted by Brad Carter ***
Thank you very much that was very helpfull. If it works out I will try and show you how it went.
Of course if it doesnt i wont ;)
|
|
|
|
Posted by Anonymous on 04-02-2001 3:43 AM
|
*** Posted by SKY ***
u ll find here very good 3d model
http://www.voodoo.cz/falcon/ms.html
other usefull ones would be ones to help get the geometry right:
circumfance of the nose
measurements at tip and base of wings
Any others would help to get a realistic model.
Also any close pictures at as many angles as possible.
Hope this isnt to much to ask =)
thank you]
|
|